Product Data Sheet Show all documents
Sikasil® Color (NZ)
Sikasil® Color (NZ)
Sikasil® Color (NZ)
Sikasil® Color (NZ)

Sikasil® Color (NZ)

Universal tile silicone

Sikasil® Color (NZ) is an acetic-crosslinking silicone sealant that is solvent-free and resistant to mildew.

  • Excellent flexibility
  • Excellent resistance to aging and weathering
  • Available in a range of colours to coordinate with décor
  • UV resistant
  • Inhibits the formation of mould and mildew
  • Impermeable to water and vapour
  • Excellent workability
  • Ideal for use with the SikaCeram® range of tiling grouts and adhesives
Product Data Sheet Show all documents

Usage

Sikasil® Color (NZ) reacts on contact with the humidity in the air, and cures into a permanently elastic, rubbery substance. Sikasil® Color (NZ) can be used as a sealant for glass, ceramics, anodized aluminium and epoxy or polyester panels. It is suitable for application in health/hygiene areas for forming expansion joints between tiles, tubs, sinks, for sealing showers and forming expansion joints between walls and floors.  

Advantages

  • Excellent flexibility
  • Excellent resistance to aging and weathering
  • Available in a range of colours to coordinate with décor
  • UV resistant
  • Inhibits the formation of mould and mildew
  • Impermeable to water and vapour
  • Excellent workability
  • Ideal for use with the SikaCeram® range of tiling grouts and adhesives

Packaging

300 ml cartridges, 12 cartridges per box

Colour

White, Manhattan, Ash, Anthracite, Beige, Ice, Black, Jasmin, Dark Brown, Light Grey, Light Sand, Graphite, Grey, Cedar.

Product Details

Product Information

Shelf Life

18 months from date of production when stored as stated.

Storage Conditions

Store in unopened original sealed packaging when stored at temperatures between +5°C and +35°C.

Density

~ 1.02 kg/l
Technical Information

Shore A Hardness

20

(ISO 868)

Tensile Strength

~ 0.6 N/mm2

(ISO 8339)

Movement Capability

25% (+/- 12.5% of joint width)

(ISO 11600)

Chemical Resistance

Resistant to many chemicals, however it is recommended that preliminary tests are conducted prior to application.

Application

Application Information

Ambient Air Temperature

Application temperature: minimum +5°C, maximum +40°C.

Curing Time

24 hours at 2mm thick, 7 days at 8mm thick (dependant on temperature, porosity of the substrates, humidity and ventilation).

Skin Time

~ 20 minutes (dependant on temperature, porosity of the substrates, humidity and ventilation).
Consumption

Consumption

Approximate metres of joint filled with a 300ml cartridge of Sikasil® Color (NZ):

Joint

4 mm wide

5 mm wide

6 mm wide

8 mm wide

3 mm deep

25

20

16.7

12.5

5 mm deep

-

12

10

7.5

6 mm deep--8.36.3
7 mm deep--7.15.4

Joint

10 mm wide

12 mm wide

20 mm wide

10 mm deep

3

2.5

1.5

12 mm deep

-

2.1

1.3

16 mm deep--0.9
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and grease free. Ensure the joint is free from excess tile adhesive. For a neat finish, apply masking tape to both sides of the joint.

CLEANING OF TOOLS

Clean tools and equipment immediately after use with Sika® Thinner C. Cured product can only be removed mechanically. Wash hands and skin thoroughly in warm soapy water.

Documents