Product Data Sheet Safety Data Sheet Show all documents
Sika® Primer-11 W+

Sika® Primer-11 W+

Universal substrate primer for tile adhesives or levelling compounds

Sika® Primer-11 W+ is a synthetic resin primer applied before using tile adhesives, waterproofing mortars and/or self-levelling compounds on indoor floors or walls to primarily reduce substrate absorbency and improve adhesion.

  • Ready to use
  • Can be diluted with water
  • Easy to apply
  • High coverage
  • Short waiting time
  • Indoor use
  • Suitable for heated floors (Water and electric systems)
  • Very low emissions
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Reduce substrate absorbency
  • Improve substrate adhesion 
  • Protect substrate from moisture entering from tile adhesive, waterproofing mortar or self-levelling compounds
 

Advantages

  • Ready to use
  • Can be diluted with water
  • Easy to apply
  • High coverage
  • Short waiting time
  • Indoor use
  • Suitable for heated floors (Water and electric systems)
  • Very low emissions

Packaging

5 kg container

Colour

Blue

Product Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

VOC emission classification GEV – Emicode EC1PLUS
Product Information

Chemical Base

Synthetic resin

Shelf Life

12 months from date of production

Storage Conditions

Product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.

Density

1,0 kg/L

Application

Application Information

Mixing Ratio

Substrate

Dilution

Normal absorbent substrate (cementitious screed, concrete)

1 kg Sika® Primer-11 W+ : 3 L water

Calcium sulphate substrate (calcium sulfate screed, gypsum plaster)

1 kg Sika® Primer-11 W+ : 1 L water

Low absorbent substrate (chipboard, wooden substrate)undiluted

Ambient Air Temperature

+5 °C min. / +30 °C max.

Substrate Temperature

+5 °C min. / +30 °C max.

Substrates

  • Concrete
  • Cement screed
  • Calcium sulfate based screed
  • Gypsum boards
  • Gypsum plaster
  • Wood

Waiting Time / Overcoating

Before applying tile adhesive or self-levelling compound to Sika® Primer-11 W+ :

Substrate

Waiting time

Cementitious substrate (cementitious screed, concrete)

~10 minutes

Wooden substrate and chipboard 

~2 hours

Low absorbent substrate (old water resistant adhesive)

~12 hours

Calcium sulphate substrate (moisture proof)

~24 hours
Consumption

Consumption

40-100 g/m² depending on substrate absorbency, application equipment and mixing ratio. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc
Application steps

MIXING

Shake or stir Sika® Primer-11 W+ in product container before use.

APPLICATION

Pour mixed diluted or undiluted primer onto the prepared substrate and apply by brush, roller or squeegee. Ensure a continuous, pore free coat covers the substrate. Avoid excessive primer consumption and the formation of puddles. Remove excess primer before applying tile adhesive or self- levelling compound

CLEANING OF TOOLS

Clean all tools and application equipment with water immediately after use. Hardened or cured material can only be removed mechanically.

Documents