Product Data Sheet Safety Data Sheet Show all documents

Sika® ViscoCrete®-2100 (NZ)

HIGH PERFORMANCE SUPERPLASTICISER FOR CONCRETE

Sika® ViscoCrete®-2100 (NZ) is a third generation polymer-based ultra-high range superplasticiser combined with strength accelerating components, that results in high early strength.

Concrete containing Sika® ViscoCrete®-2100 (NZ) has the following advantages:

High density and high strength
Pronounced increase in early strength development resulting in early stripping times for precast and in situ concrete
Reduced energy costs due to reduction in use of steam curing systems
Reduced closure times for repairs of roads and runways

Product Data Sheet Safety Data Sheet Show all documents

Usage

Sika® ViscoCrete®-2100 (NZ) is suitable for concrete mixes which require high early strength development. Sika® ViscoCrete®-2100 (NZ) is mainly used for the following applications:

Precast concrete
In situ concrete requiring fast stripping times
Self compacting concrete
Prestressed concrete where early release of stressing cables is necessary
Ready mix concrete where minimum time delays are critical e.g. plant/factory shutdown
In colder temperatures where accelerated strength development is necessary
As a substitute for rapid hardening cement
In tidal situations where wave action may damage fresh concrete.

Advantages

Concrete containing Sika® ViscoCrete®-2100 (NZ) has the following advantages:

High density and high strength
Pronounced increase in early strength development resulting in early stripping times for precast and in situ concrete
Reduced energy costs due to reduction in use of steam curing systems
Reduced closure times for repairs of roads and runways

Packaging

20 litre pails, 200 litre drums or bulk delivery

Colour

Cloudy brown liquid

Product Details

Product Information

Chemical Base

Aqueous solution of modified polycarboxylate and strength accelerators

Shelf Life

Twelve (12) months from date of manufacture when stored as stated.

Storage Conditions

Store in unopened original containers protected from direct sunlight and frost at temperatures between +5°C and +35°C.

Density

~ 1.1 kg/litre

pH-Value

~ 8.0

Application

Application Information

Compatibility

Compatible with other Sika Admixtures, but add separately. Do not premix.

DISPENSING

MIXING

Sika® ViscoCrete®-2100 (NZ) is added to the concrete immediately prior to pouring
To optimize the water reducing effect, mixes containing Sika® ViscoCrete®-2100 (NZ) require extended mixing times (minimum 5 minutes)
With higher dose rates, water content of the concrete should be reduced to avoid segregation

Consumption

Recommended Dosage

0.5 - 1.5% by weight of cement
Note: Dose rate will affect workability, setting time, early and ultimate strength. Trials are recommended to determine the dose rate for each application.