Sikafloor® MultiDur EB-12
Slip resistant broadcast coloured epoxy floor coating system
Sikafloor® MultiDur EB-12 is a 2-part epoxy coloured resin based floor coating system that can provide a hard wearing, seamless, low maintenance, slip resistant gloss finish when broadcast with different aggregate grades. For medium - heavy wear conditions. Thickness 2.0–3.0 mm. Internal use.
- Seamless
- Good chemical and mechanical resistance
- Easy application
- Waterproof
- Gloss finish
- Easy cleanability
- Low maintenance
- Conforms to OS 8 German standards
System Structure
Usage
- On concrete and cementitious screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- On multi-storey and underground car park decks and for wet process areas, e.g. beverage and food industry
Advantages
- Seamless
- Good chemical and mechanical resistance
- Easy application
- Waterproof
- Gloss finish
- Easy cleanability
- Low maintenance
- Conforms to OS 8 German standards
Colour
Available in many colours.
Appearance
Slip resistant, gloss finish
System Details
ENVIRONMENTAL INFORMATION
- Conformity with LEED v4 MRc 2 (Option 1): Building Product Disclosure and Optimization – Environmental Product Declarations - Sikafloor®-150, Sikafloor®-151
- Conformity with LEED v4 MRc 4 (Option 2): Building Product Disclosure and Optimization - Material Ingredients - Sikafloor®-150, Sikafloor®-151
- Conformity with LEED v2009 IEQc 4.2: Low-Emitting Materials - Paints and Coatings - Sikafloor®-150, Sikafloor®-151
- IBU Environmental Product Declaration (EPD) available - Sikafloor®-150, Sikafloor®-151
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 1504-2 - Surface protection systems for concrete - Coating.
- CE Marking and Declaration of Performance to EN 13813 - Resin screed material for internal use in buildings - Sikafloor®-150, Sikafloor®-151, Sikafloor®-264 N
- Sliding test DIN 51130, Sikafloor®-264 N, Roxeler, Certificates No. 020044-17-9, 020044-17-21, 020044-17-11, 020044-17-10, 020044-17-22
- Surface Protection System OS 8 EN 1504-2, Sikafloor® MultiDur EB-12, kiwa, Test report No. P 11210
System Structure
Sikafloor® MultiDur EB-12 system (~2–3 mm)
| Layer | Product |
| 1. Scratch coat & Sand broadcast | Sikafloor®-150/-151,quartz sand 0.4 – 0.7 mm / Sika® Aggregate-508 |
| 2. Wearing finish | Sikafloor®-264 N |
Composition
Epoxy
Nominal thickness
~2.0 – 3.0 mm
Chemical Resistance
Resistant to many chemicals. Contact Sika Technical Service for specific information.
Thermal Resistance
| Exposure* | Dry heat |
| Permanent | +50 °C |
| Short-term max. 7 d | +80 °C |
| Short-term max. 12 h | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e. during steam cleaning etc.)
*No simultaneous chemical and mechanical exposure.
Application
Product Temperature
Refer to the individual Product Data Sheet
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
≤ 4% parts by weight Using Sikafloor®-150
≤ 6% parts by weight Using Sikafloor®-151
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet). Osmosis caused by rising moisture or incorrect primer application is not covered by product warranty
Waiting Time / Overcoating
Before applying Sikafloor®-264 N on Sikafloor®-156/-161/-160 allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 24 hours | 3 days |
| +20 °C | 12 hours | 2 days |
| +30 °C | 8 hours | 1 day |
Before applying Sikafloor®-264 N on Sikafloor®-264 N allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 30 hours | 48 hours |
| +20 °C | 24 hours | 30 hours |
| +30 °C | 16 hours | 24 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~72 hours | ~6 days | ~10 days |
| +20 °C | ~24 hours | ~4 days | ~7 days |
| +30 °C | ~18 hours | ~2 days | ~5 days |
Consumption
Sikafloor® MultiDur EB-12 system (~2–3 mm)
| Coating System | Product | Consumption |
| Scratch Coat | 1 × Sikafloor®-150 filled at 1:1 with quartz sand 0.1–0.4mm / Sika® Aggregate-508 or Sikafloor®-151 filled at 1:0.5 with quartz sand 0.1–0.4mm / Sika® Aggregate-508 | ~1.3 kg/m² |
| Sand Broadcast | Quartz sand 0.4–0.7 mm / Sika® Aggregate-501 | ~4–6 kg/m² |
| Seal / Top coat | 1 × Sikafloor®-264 N | ~0.6–0.8 kg/m² |
CLEANING
Refer to the Method Statement Sikafloor®‐ Cleaning Regime