SikaWrap® Hex-100 G

0 ° (unidirectional)

n/a

Store dry at +4°C – 35°C

2.5 g/cm³

0.36 mm

2.5 g/cm³

917 gsm

2,276 MPa

72.4 GPa

4.00 %

* Average ultimate value minus 3 standard deviations

Surface must be clean and sound. It may be dry or damp, but free of standing water and frost. Remove dust, laitance, grease, curing compounds, impregnations, waxes, foreign particles, disintegrated materials and other bond inhibiting materials from the surface. Consult Sikadur®-300, Sikadur® Hex-300 and Sikadur®-330 data sheets for additional information on surface preparation. Existing uneven surfaces must be filled with an appropriate repair mortar. The adhesive strength of the concrete must be verified following surface preparation by random pull-off testing (ASTM D4541) at the discretion of the engineer. Minimum tensile strength 1.4 MPa with concrete substrate failure.

Preparation Work: Concrete - Blast clean, shotblast or use other approved mechanical means to provide an open roughened texture. In certain applications and at the engineer’s discretion, the intimate contact between the substrate and the fabric may be determined to be non-critical. In these cases, a thorough cleaning of the substrate using low pressure sand or water blasting is sufficient. Refer to the method statement for full information.

Mixing: Consult Sikadur®-300 or Sikadur® Hex-300 data sheets for information on epoxy resins.