Product Data Sheet Show all documents

Sarnafil® Metal PVC

Metal sheets laminated with Sarnafil® G roof waterproofing membrane

Sarnafil® Metal PVC is a galvanised steel sheet, laminated with Sarnafil® G polyvinyl chloride (PVC) roof waterproofing membrane.

  • Resistant to UV exposure
  • Can be cut and shaped either on site or in metal workshop
  • Sarnafil® G/S lamination is hot air weldable
Sarnafil® Metal PVC
Product Data Sheet Show all documents

Usage

Production of profiles for perimeter fastenings and junctions.
  • Sarnafil® G/S (PVC) roof waterproofing membrane systems.
 

Advantages

  • Resistant to UV exposure
  • Can be cut and shaped either on site or in metal workshop
  • Sarnafil® G/S lamination is hot air weldable

Packaging

Sarnafil® G/S Metal Sheet

 

length

2,00 m

width

1,00 m

weight6,20 kg/m²(±8 %)
weight per sheet12,40 kg (±8 %)
available colourlight grey

Colour

Surface

smooth

Thickness

Sarnafil® G lamination

1,20 mm (-0,060 mm / +0,120 mm)

Galvanised metal

0,60 mm (±0,060 mm)

Total thickness

1,80 mm (-0,120 / +0,180 mm)

Colour Reference

Top surface

light grey (nearest RAL 7047)

Bottom surface

Metal: Cut (Epoxy coating protection)

Product Details

Product Information

Chemical Base

Top layer

polyvinyl chloride (PVC) with inlay of glass non-woven

Bottom layer

galvanised steel (quality DX51D Z275) with epoxy coating protection

Shelf Life

5 years from date of production

Storage Conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Do not stack pallets of metal sheets on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging.
System information

System Structure

The following products must be considered for use depending on roof design:

  • S-Sealing Tape (10 mm × 10 mm × 2 mm)

Ancillary products: 

  • Sarnafil® G 410 types
  • Sarnafil® S 327 types

Compatibility

Top surface PVC lamination is not resistant to tar, bitumen, oil and materials containing solvents. These materials could adversely affect the product properties.

Application

Application Information

Ambient Air Temperature

-20 °C min. / +60 °C max.

Substrate Temperature

-30 °C min. / +60 °C max.

Documents