Sikafloor® MultiDur ET-16 ECC
Slip resistant coloured epoxy floor coating system for damp substrates
Sikafloor® MultiDur ET-16 ECC is a coloured rigid epoxy floor covering with textured properties based on epoxy resins for industrial floors on damp substrates. Sikafloor® MultiDur ET-16 ECC is an epoxy coloured resin based slip resistant floor coating system that can provide a hard wearing, seamless, low maintenance textured gloss finish on damp substrates. For normal - medium wear conditions. Thickness ~ 2–4mm. Internal use.
- Seamless
- Slip resistant
- Good mechanical resistance
- Good chemical resistance
- Medium thermal shock resistance
- Fast and easy application
- Thermal expansion properties similar to concrete
- Good bond to green or hardened damp or dry concrete
- Good early and final mechanical strengths
- Good resistance to water and oils
- For internal use
- Will not corrode steel reinforcement
System Structure
Usage
- On concrete and cementitious screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- Multi-storey and underground car park decks, maintenance hangars and wet process areas, e.g. beverage and food industry
- Floors where slip resistance and easy cleanability is required
Advantages
- Seamless
- Slip resistant
- Good mechanical resistance
- Good chemical resistance
- Medium thermal shock resistance
- Fast and easy application
- Thermal expansion properties similar to concrete
- Good bond to green or hardened damp or dry concrete
- Good early and final mechanical strengths
- Good resistance to water and oils
- For internal use
- Will not corrode steel reinforcement
Colour
Available in a range of colours.
Appearance
Textured, slip resistant, gloss finish
System Details
ENVIRONMENTAL INFORMATION
- Conformity with LEED v4 MRc 2 (Option 1): Building Product Disclosure and Optimization – Environmental Product Declarations - Sikafloor®-80 EpoCem Primer
- Conformity with LEED v2009 IEQc 4.2: Low-Emitting Materials - Paints and Coatings - Sikafloor®-80 EpoCem Primer, Sikafloor®-81 EpoCem
- IBU Environmental Product Declaration (EPD) available - Sikafloor®-80 EpoCem Primer, Sikafloor®-81 EpoCem, Sikafloor®-264 N Thixo
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 1504-2 - Surface protection product for concrete - Coating - Sikafloor®-81 EpoCem®, Sikafloor®-264 N Thixo
- CE Marking and Declaration of Performance to EN 1504-3 - Concrete repair product for structural repair - Sikafloor®-81 EpoCem®
- CE Marking and Declaration of Performance to EN 13813 - Resin screed material for internal use in buildings - Sikafloor®-81 EpoCem®, Sikafloor®-264 N Thixo
- Coating compatibility test AA-0244, Sikafloor®-264 N, BMW Group, Report No. 170211291
- Conformity test EN 1504-2, Sikafloor®-81 EpoCem, Sika, Approval No. 2116-CPD-0101
- Conformity test EN 1504-3, Sikafloor®-81 EpoCem, Sika, Approval No. 2116-CPD-0101
- Fire testing EN 13501-1, Sikafloor®-81 EpoCem, MPA Dresden, Report No. 041706
- Fire testing EN 13501-1, Sikafloor®-81 EpoCem, Hoch, Report No. KB-Hoch-170138
- Fire testing EN 13501-1, Sikafloor®-264 N Thixo, Hoch, Report No. KB-Hoch-170622
- Fire testing ISO 11925-2, Sikafloor®-264 N Thixo, Hoch, Report No. PB-Hoch-170620
- Fire testing ISO 9239-1, Sikafloor®-264 N Thixo, Hoch, Report No. PB-Hoch-170621
- Migration test EN 23270, Sikafloor®-81 EpoCem, kiwa, Report No. P 8740a
- Indirect contact to foodstuff (EU) 1935/2004, Sikafloor®-264 N Sikafloor®-264 N LO, Fesenius Bericht, Test report No. 3419034-01
- Outgassing behavior VOC/SVOC ISO 14644-8, Sikafloor®-264 N, CSM Statement of Qualification, Fraunhofer IPA, Report No. SI 1709-952
- Particle emission ISO 14644-1, Sikafloor®-264 N, CSM Statement of Qualification, Fraunhofer IPA Report No. SI 1709-952
- Reaction to fire classification according to DIN EN 13501-1, Sikafloor®-151 + Sikafloor®-264 N, Bfl-s1
- Reaction to fire classification according to DIN EN 13501-1, Sikafloor®-151 + Sikafloor®-264 N + Sikafloor®-264 N Thixo
- Sliding test DIN 51130, Sikafloor®-81 EpoCem, Roxeler, Certificate No. 020044-17-7
- Sliding test DIN 51130, Sikafloor®-264 N Thixo, Roxeler, Certificates No. 020044-17-19, 020044-17-2, 020044-17-20, 020044-17-3, 020044-17-4
- Sliding test DIN 51131, Sikafloor®-81 EpoCem, Roxeler, Certificates No. 020044-17-7a, 020044-17-8a
- Sliding test DIN 51131, Sikafloor®-264 N Thixo, Roxeler, Certificate No. 020044-17-20a, 020044-17-2a, 020044-17-3a, 020044-17-4a, 020044-17-9a
- Various tests EN 13892, Sikafloor®-81 EpoCem, Hartl, Report No. 1-27679/1
- Various tests EN 1504, Sikafloor®-81 EpoCem, SCERT, Certificate No. 2116-CPD-0101
- Various tests EN 1504-2, Sikafloor®-81 EpoCem, Applus, Report No. 09/349-963
- Various tests EN 1504-3, Sikafloor®-81 EpoCem, Applus, Report No. 09/351-965
- Water permeability test DIN 1048-5, Sikafloor®-81 EpoCem, Polymer Institut, Report No. P 3439
System Structure
Sikafloor® MultiDur ET-16 ECC
Layer | Product |
1.Primer | Sikafloor®-80 EpoCem Primer |
2.Levelling screed | Sikafloor®-81 EpoCem® |
3.Top coat | 1–2 × Sikafloor®-264 N Thixo |
Composition
Epoxy
Nominal thickness
~2–4mm
Shore D Hardness
~76 (7 days / +23 °C) | (DIN 53 505) |
Tensile Adhesion Strength
> 1,5 MPa (failure in concrete) | (ISO 4624) |
Chemical Resistance
Sikafloor®- 264 N Thixo provides the chemical resistance. Refer to Product Data Sheet.
Thermal Resistance
Exposure* | Dry heat |
Permanent | +50 °C |
Short-term max. 7 days | +80 °C |
Short-term max. 12 hours | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e.during steam cleaning etc.) *No simultaneous chemical and mechanical exposure.
Skid / Slip Resistance
R9 | (DIN 51130) |
Application
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % max.
Dew Point
Beware of condensation.
The substrate and uncured floor products must be at least +3 °C above the dew point to reduce the risk of condensation or blooming on the surface of the applied product.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
Can be applied on green or damp concrete, with no standing water. Although the system can be applied onto green concrete surfaces (> 24 hours), it is advised to allow at least 3 days for early shrinkage of concrete to occur in order to prevent concrete shrinkage cracks from appearing on the screed and top coat.
Waiting Time / Overcoating
Before applying Sikafloor®-81 EpoCem® on Sikafloor®-80 EpoCem Primer allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 12 hours | 24 hours |
+20 °C | 6 hours | 12 hours |
+30 °C | 4 hours | 6 hours |
Sikafloor®-81 EpoCem® can be overcoated with vapour impermeable coatings when the surface moisture content <4 % parts by weight
Not earlier than :
Substrate Temperature | Waiting Time |
+10 °C | 48 hours |
+20 °C | 24 hours |
+30 °C | 24 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | ~72 hours | ~6 days | ~10 days |
+20 °C | ~24 hours | ~4 days | ~7 days |
+30 °C | ~18 hours | ~2 days | ~5 days |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Consumption
Refer to "System Structure"
Sikafloor® MultiDur ET-16 ECC (~2–4 mm)
Layer | Product | Consumption |
1. Primer | 1 × Sikafloor®-80 EpoCem Primer | ~0.3–0.5 kg/m2 |
2.Levelling screed | 1 × Sikafloor®-81 Epo-Cem® | ~2.25 kg/m2/mm |
3.Top coat | 1–2 × Sikafloor®-264 N Thixo | ~0.5–0.8 kg/m² per layer |
CLEANING
Refer to the Method Statement: Sikafloor®-Cleaning Regime
