Product Data Sheet Show all documents

SikaProof®-110 FB6

1.5 mm thick FPO membrane with a hybrid bonding layer for waterproof tunnel lining

SikaProof®-110 FB6 consists of a flexible polyolefin (FPO) layer membrane (EVA based) with a hybrid bonding layer that forms a mechanical and chemical dual bond with the in-situ concrete lining, and a non-woven polypropylene geotextile (felt), which is linearly fixed onto the membrane and serves as protection.

  • Also available without geotextile (felt)
  • High mechanical and chemical bonding properties on the inner concrete lining
  • No lateral water migration between concrete and membrane
  • Very good thermal jointing properties
  • Flexible in cold temperatures
  • High crack-bridging ability
  • Simple and fast to install
Product Data Sheet Show all documents

Usage

SikaProof®-110 FB6 is used for the waterproofing of tunnels and below ground structures.  

Advantages

  • Also available without geotextile (felt)
  • High mechanical and chemical bonding properties on the inner concrete lining
  • No lateral water migration between concrete and membrane
  • Very good thermal jointing properties
  • Flexible in cold temperatures
  • High crack-bridging ability
  • Simple and fast to install

Packaging

Roll width

2 m or 2.1 m

Roll length

specified

Refer to the current price list for available packaging variations.

Colour

Top layer colour

White to grey

Bottom layer colour

White to grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • CE marking and declaration of performance based on EN 13491:2004/A1:2006 Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Product Information

Shelf Life

24 months from date of production

Storage Conditions

The Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between +5 °C and +35 °C. Protect the Product from direct weather exposure. Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to the packaging.

Thickness

Overall mechanical thickness without geotextile

1.50 mm

Mass per Unit Area

1.34 kg/m² (-0.06 kg/m²) without geotextile

(EN 1849-2)
System information

System Structure

  • SikaProof®-11 Anchor

  • SikaProof®-12 Anchor

  • Sikaplan® WT Trumpet Flange
Technical Information

Resistance to Impact

Method A, Hard support

> 350 mm

Resistance to Static Load

Hard support

Pass (20 kg)

Resistance to Static Puncture

1.6 kN (- 0.1 kN)

(EN ISO 12236)

Tensile Strength

Longitudinal (MD)

9.0 N/mm² (- 1.0 N/mm²)

Transversal (CMD)

9.0 N/mm² (- 1.0 N/mm²)

Resistance to Tearing (nail shank)

Longitudinal (MD)

> 400 N

Transversal (CMD)

> 400 N

Joint Peel Resistance

> 80 N/50 mm

(EN 12316-2)

Foldability at Low Temperature

-40 °C

(EN 495-5)

Reaction to Fire

Class E

(EN 13501-5)

Resistance to Oxidation

> 75 % retained tensile strength and elongation

(EN 14575)

Water Tightness

Method B, 24 hours at 60 kPa

Pass

Durability of Water Thightness against Ageing

Aged 12 weeks at +70 °C, tested 24 hours at 60 kPa

Pass

Durability of Water Tightness against Chemicals

Calcium hydroxide, aged 28 days at +23 °C, tested 24 hours at 60 kPa

Pass

Ambient Maximum Temperature of Liquids

+ 35 °C max.

Resistance to lateral water migration

Up to 7 bar

Pass

Water permeability

Type A

< 10-6 m3 · m-2 · d-1

Application

Application steps

SUBSTRATE PREPARATION

For information on substrate quality and pre-treatment, refer to the following Sika® document:

  • SikaProof®-110 for Umbrella Waterproofing of Tunnels

APPLICATION

IMPORTANT

Strictly follow installation and maintenance procedures

Strictly follow installation and maintenance procedures as defined in Method Statements, application manuals and working instructions which must always be adjusted to the actual site conditions.

IMPORTANT

Ventilation in confined spaces

Always ensure good ventilation when applying the Product in a confined space.

For information on application, refer to the following Sika® document:

  • SikaProof®-110 for Umbrella Waterproofing of Tunnels

 

Documents