Product Data Sheet Show all documents

Sika® Fibermesh®-150

MICRO-SYNTHETIC MONOFILAMENT FIBER

Sika® Fibermesh®-150, micro-reinforcement system for concrete—100 percent virgin homopolymer polypropylene multifilament (monofilament) fibers .  

  • Increased resistance to explosive spalling
  • Reduces plastic shrinkage cracking
  • Reduces plastic settlement cracking
  • Improves impact, shatter and abrasion resistance
  • Enhances durability
  • Promotes uniform bleed and reduces bleed water
  • Inhibits and controls the formation of intrinsic cracking in concrete
  • Increases cohesion and reduces segregation
  • Reduces freeze/thaw damage
Product Data Sheet Show all documents

Usage

Sika® Fibermesh®-150 act mechanically by supporting the aggregate within the concrete with multidimensional fiber network and developing a uniform bleed system.  The fiber does not affect the curing process chemically and does not absorb water.  The Sika® Fibermesh®-150 can be used in all types of concrete applications to control plastic shrinkage and settlement cracking.  Typical applications include:
  • Slabs on ground
  • Residential applications: side-walks, driveways, decks, curbs
  • Precast elements,
  • Overlays / toppings
  • Stucco
 
  • Shotcrete
  • Roads / Pavements
  • Bridge Decks

Advantages

  • Increased resistance to explosive spalling
  • Reduces plastic shrinkage cracking
  • Reduces plastic settlement cracking
  • Improves impact, shatter and abrasion resistance
  • Enhances durability
  • Promotes uniform bleed and reduces bleed water
  • Inhibits and controls the formation of intrinsic cracking in concrete
  • Increases cohesion and reduces segregation
  • Reduces freeze/thaw damage

Packaging

Sika® Fibermesh®-150 fibers are available in 1 kg degradable bags packed into cartons that contain 15 bags.

Colour

  • Fiber Type: Monofilament micro synthetic fibre

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Complies with European Standard EN 14889-2:2006 Fibres for Concrete Part 2:  Class Ia and carries the CE marking
  • Complies with ASTM C1116/C1116M, Type III fiber reinforced concrete and therefore ASTM D7508
Product Information

Shelf Life

When stored in dry conditions shelf life is 5 years

Storage Conditions

Sika® Fibermesh®-150 should be stored in a dry warehouse. Protect product from the rain.

Density

0.91 g/cm3

Dimensions

  • Length: 12 mm
  • Diameter: 0.03 mm

Melting Point

162 oC

Ignition Temperature

404 ° C
Technical Information

Resistance to Alkalinity

Excellent

Application

Consumption

Recommended Dosage

The dosage of the Sika® Fibermesh®-150 will vary according to the type of application and performance requirements.  Standard recommended dosage ratio of Sika® Fibermesh®-150 is 1.0 kg/m3  of concrete.  For explosive spalling resistance the dosage rate will be between 1.0 kg/m3 and 2.0 kg/m3 ,depending on the design requirements. Dosages outside the recommended dosage range can be used to meet project specific requirements.  If this is the case please contact your Sika representative for technical support.

Documents