Product Data Sheet Safety Data Sheet Show all documents
Nailbond® Fast

Nailbond® Fast

Fast grab, zero solvent, multi-purpose construction adhesive

Nailbond® Fast is a premium, water based, multi purpose construction adhesive providing strong initial grab and high bond strength.

  • Can be repositioned for up to 60 minutes after application
  • Easy to use, easy clean up
  • Reduces squeaking associated with nail ride in floors
  • Can be painted with water-based coatings
  • Can bridge gaps up to 9 mm
  • High bond strength, with particularly strong adhesion to metal
  • Fast initial grab – minimises slippage on vertical surfaces
  • Reduces number of mechanical fasteners required to install floors or walls.
  • Zero solvent* – low odour and no fumes
  • Low V.O.C.** (Volatile Organic Compounds)
  • High heat resistance
  • Flows easily at all temperatures
Where to buy
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Panels to wall studs
  • Fibre cement, plywood, particleboard and strip flooring to joists
  • Polystyrene wall panels
  • Architraves, trims and skirting boards to walls
  • Loose tiles back onto walls
 

Advantages

  • Can be repositioned for up to 60 minutes after application
  • Easy to use, easy clean up
  • Reduces squeaking associated with nail ride in floors
  • Can be painted with water-based coatings
  • Can bridge gaps up to 9 mm
  • High bond strength, with particularly strong adhesion to metal
  • Fast initial grab – minimises slippage on vertical surfaces
  • Reduces number of mechanical fasteners required to install floors or walls.
  • Zero solvent* – low odour and no fumes
  • Low V.O.C.** (Volatile Organic Compounds)
  • High heat resistance
  • Flows easily at all temperatures

Packaging

Packaged in 300ml (420g) cartridges, 12 cartridges per box. Also in 600ml sausages, 15 sausages per box

Colour

Pale brown

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

AS2329-1980, “Mastic Adhesives for Fixing Wallboards”

**Nailbond® Fast has been independently tested for V.O.C. content, as a general purpose construction and wallboard adhesive for the purpose of Green Star rating. Certificate ref. F0909-12.
Product Information

Shelf Life

Two (2) years in unopened original sealed packaging when stored according to the conditions stated below.

Storage Conditions

Store in unopened original sealed packaging at temperatures between +5°C and +35 °C.

Density

~1.4 kg/l

Application

Application Information

Curing Time

Full cure: 24 hours depending on conditions. When both surfaces are porous, a firm slip-resistant bond will develop after 15 minutes at +30°C and 60 minutes at +10°C. Should one surface be non-porous or the substrate damp, a firm slip-resistant bond will be achieved in approximately 8 hours. After 24 hours, 90% of the final strength will be achieved (dependant on temperature, porosity of the substrates, humidity and ventilation).

Skin Time

20 minutes

Open Time

Repositioning time: 60 minutes (approx.) at 25°C.
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, sound, dry and free of oil, grease and surface contamination. Thoroughly remove all loose particles and dust. Any loose flaking material must be removed and light sanding is recommended. Nailbond® Fast will adhere to damp (not wet) substrates but drying times may increase. Substrates should be above +5ºC. Do not bond 2 non-porous substrates.  Ensure that at least one surface is porous.

CLEANING OF TOOLS

Clean tools and equipment immediately after use with water. Cured product can only be removed mechanically. For hands and skin wash thoroughly in warm soapy water.

Documents