Sikafloor® Level PRO Finish

Green Star (VOC-SCQMD Rule 1168)

Polymer modified cement compound

Unopened packaging can be stored for up to 24 months in a cool, dry and
weatherproof environment.

Pails must be stored off the floor. Avoid sitting product in direct sunlight prior to application.

Porous

No hazardous combustion products are known

1.4 - 1.5 Litres of clean, cool water per 3kg of powder.

0 - 4mm

• Minimum 10°C
• Maximum 35°C

10 - 15 Minutes @ 23°C

Do not mix more product than can be applied within 15 minutes.

Flooring can be installed only when surface is dry and can be worked on without damage (usually 20 – 30 minutes @ 23°C).

25-30m2 can be reached with 3kg of Sikafloor® Level PRO Finish when

applying as a skim coat over a smooth porous concrete surface.

Multiple coats may be required when installing over textured substrates & Sikafloor®-14 Prep 'N' Prime

Consumption will vary depending on surface conditions.

• High speed drill & mixing paddle, bucket + trowel

Apply mixed product to the prepared surface with a flat steal trowel. While using force against the surface a thin layer is applied to seal the concrete and fill minor imperfections.

Clean tools and equipment with warm water while the product is still wet.