Sikafloor® Level TOP

Green Star (VOC-SCQMD Rule 1168)

Polymer modified cement compound

Unopened bags can be stored for up to 12 months in a cool, dry and
weatherproof environment.

Bags must be stored off the floor. Avoid sitting bags in direct sunlight prior
to application.

1   day cure – 14MPa
28 day cure – 29MPa

28 day cure – 5MPa

No hazardous combustion products are known

Porous

5 - 5.2 Litres of clean, cool water

  1 - 30mm (neat)

10 - 50mm (bulked with 1-2mm aggregate)

10°C - 35°C

+8°C min. / +30°C max. Dew Point: Beware of condensation! The substrate and uncured floor must be at least 3°C above dew point to reduce the risk of condensation, blooming or cement laitance on the floor finish.

18 Minutes @ 23°C

Allow 18 hours at 23°C prior to the application of impervious floor coverings. Drying is dependent on thickness of application, temperature, air
flow & relative humidity. Increased air flow will help with drying speeds in cooler temperatures.

70 Minutes @ 23°C

85 Min @ 23°C

12L - 4m2 @ 3mm

• Use a double disc stirring paddle or a spiral mix
  paddle (low speed `300-400 rpm) and suitable size bucket/vessel -
  20L +

• Purpose built mechanical pump

Mix the entire 20kg bag of powder with 5 - 5.2 Litres of clean, cool water. Slowly add powder to the water while mixing with a suitable electric drill and mixing paddle. 10kg of clean 1-2mm aggregates may be mixed with 20kg of Sikafloor® Level Top for bulking out purposes. Thoroughly mix at high speed for 2 minutes to a lump free consistency. Not mixing for the recommended time or additional water may result in

product irregularities and possible failure.

Pour or Pump Sikafloor® Level Top, then spread with a long handled gauged spreader to heights as required. Sikafloor® Level Top will seek its own level during the first 12 minutes. For touch-ups, use a flat steel trowel.