Sikafloor® Level PRO

Polymer modified cement compound

Twelve (12) months in unopened, original packaging if stored as stated.

Bags must be stored off the floor. Avoid sitting bags in direct sunlight prior to application.

Subfloor - Primer - Sikafloor® Level PRO - Chosen Flooring

1   day cure: ~16 MPa
28 day cure: ~30 MPa

28 day cure: ~6 MPa

Porous

No hazardous combustion products are known

5 - 5.2 Litres of clean, cool water

1 - 30mm

10°C - 35°C

~18 minutes @ 23°C

~65 Minutes @ 23°C

~80 Min @ 23°C

Allow ~18 – 20 hours at 23°C prior to the application of floor coverings

12 Litres - 4m² @ 3mm

Heavy duty electric drill and mixing paddle (500 rpm) and a suitable sized mixing bucket/vessel.

Mix the entire 20kg bag of powder with 5 - 5.2 Litres of clean, cool water. When applying above 20mm Sika® recommends 5L be added. Slowly add powder to the water while mixing with a suitable electric drill and mixing paddle. Thoroughly mix for 2 minutes to a lumpfree consistency. Not mixing for the recommended time or additional water may result in product irregularities and possible product failure.

Pour or Pump Sikafloor® Level PRO, then spread with a long handled gauged spreader to heights as required. Sikafloor® Level PRO will seek its own level during the first 15 minutes. For touch-ups, use a flat steel trowel.

Clean tools and equipment with warm water and detergent while the product is still uncured.