Product Data Sheet Safety Data Sheet Show all documents
Nailbond® SuperGrip 30 Minute

Nailbond® SuperGrip 30 Minute

FAST CURING PREMIUM POLYURETHANE CONSTRUCTION ADHESIVE

A transparent polyurethane paste adhesive. Nailbond® SuperGrip 30 Minute is a versatile, ready to use, fast curing, general purpose construction adhesive.

  • 100% waterproof (BS‐EN204)
  • Incredibly strong
  • Bonds almost anything, including LOSP treated timber
  • Non drip
  • No shrinkage
  • Cures in 30 minutes*
  • Interior and exterior use
  • High temperature resistance (minus 30°C to +100°C)
  • Cures transparent
  • Does not stain
Where to buy
Product Data Sheet Safety Data Sheet Show all documents

Usage

Bonding of:
  • Edge bonding of particle board flooring
  • Timber & MDF
  • Marble & stone
  • Concrete
  • Brick/blocks
  • Glass
  • Fibre cement
  • Tiles
  • Rubber
  • Metals
  • Aluminium
 

Advantages

  • 100% waterproof (BS‐EN204)
  • Incredibly strong
  • Bonds almost anything, including LOSP treated timber
  • Non drip
  • No shrinkage
  • Cures in 30 minutes*
  • Interior and exterior use
  • High temperature resistance (minus 30°C to +100°C)
  • Cures transparent
  • Does not stain

Packaging

310ml cartridges

Colour

Translucent

Product Details

Product Information

Chemical Base

Transparent polyurethane paste

Shelf Life

Twelve (12) months from date of production when stored as stated.

Storage Conditions

Store in original, unopened packaging in cool, dry conditions.

Density

1.12g/cm³

Solid content by weight

100% approximately
Technical Information

Service Temperature

‐30°C to +100°C

Application

Application Information

Ambient Air Temperature

+5°C to +35°C

Curing Time

Approximately 30 minutes, depending on temperature, moisture content of surfaces and adhesive thickness. Strength will increase over the next 24 hours.

Open Time

Relocation Time: Approximately 5‐10 minutes depending on temperature and ventilation.
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean and free from all dust, laitance, scale, rust, loose particles, grease and foreign matter.

CLEANING OF TOOLS

Clean up with acetone or white spirit. Cured adhesive can only be removed mechanically.

Documents