Facades
Sika MonoTop®-723 N
Sika MonoTop®-723 N is a polymer modified surfacing/finishing mortar, ready to mix, meeting the requirement of class R3 of EN 1504-3.
Use
- Thin layer render
- Use as a concrete pore sealer / levelling mortar
- Repairing of minor defects (pores and honeycombed concrete)
- Suitable for restoration work (Principle 3, method 3.1 and 3.3 of EN 1504-9)
- Suitable for preserving or restoring passivity (principle 7, method 7.1 and 7.2 of EN 1504-9)
Characteristics and Advantages
- Easy to apply and excellent finishing
- Suitable for hand or wet spray application
- Can be applied up to 5 mm thick per application layer
- Class R3 of EN 1504-3
- Restoration work
- Sulphate resistant
- Low cracking sensitivity
- Very good resistance to water and chloride penetration
- Compatible with Sikagard® overcoat systems
- A1 fire rating
Colour
GreyPackaging
25 kg bag
Product Data Sheet
Sika MonoTop-723 NSafety Data Sheets
Sika MonoTop-723 NSika® Primer-11 W
Sika® Primer-11 W is a primer based on organic copolymers and specific additives in a water emulsion to be used as a basecoat on cement-based substrates and plaster, gypsum board or plasterboard, anhydrite screeds or concrete.
Use
- Treating gypsum or plasterboard substrates onto cement-based adhesives or mortars have to be successively applied
- Surface treatment for very absorbent cementitious screeds or plaster prior to the application of cement-based adhesives, mortars or self-levelling compounds
Characteristics and Advantages
- Water emulsion
- Priming absorbant substrates
- Improve adhesion to the substrate
Colour
Red liquid
Packaging
5 kg bottle
Product Data Sheet
Sika Primer-11 WSafety Data Sheets
Sika Primer-11 WSikalastic®-152
BRANZ Appraised rapid curing cement mortar for flexible waterproofing and concrete protection (meets the requirements of EN 1504-2)
Use
- Concrete surface protection, in accordance with the following EN 1504-9 Principles: 1: protection against ingress (coating); 2: moisture control (coating); 8: increase of resistivity (coating)
- Waterproofing and protection of hydraulic structures such as: basins, tanks, swimming pools, concrete piping, bridges and canals
- Waterproofing and protection of outer walls to be buried into the ground
- Inside waterproofing of light counter pressure water, of walls and floors in basements
- Waterproofing of terraces and balconies with concrete or old tiles substrates
- Waterproofing of weather exposed surfaces
- Protective, flexible, anti-carbonation coating of concrete surfaces also damaged from plastic and hydraulic shrinkage
- Flexible coating of concrete structures, also subjected to flexural strain
Characteristics and Advantages
- Flexible waterproofing and concrete protection with one product
- Reliable application also in very humid environment
- Applicable also on lightly humid substrates
- Non sagging: easy application also on vertical walls
- Fast curing (also at low temperature)
- Crack bridging properties
- Excellent adhesion onto almost all substrates, such as for instance concrete, cement mortars, stone, ceramics, bricks and wood
Colour
Grey
Packaging
26.4 kg ready batched packs
Product Data Sheet
Sikalastic-152SikaCeram®-255 StarFlex
Highly flexible powder adhesive for fixing of medium-large sized ceramic tiles, C2TE classified according to EN 12004 and S1 classified according to EN 12002
Use
- Laying ceramic tiles of all types, gres porcelain, even in large sizes
- Laying gres porcelain slabs, low thickness featured
- Laying natural stone and marble, as long as they are not affected by water
- Laying on heated floor slabs or electric heated screeds
- Suitable for indoor and outdoor situations
- On walls and floors
- Suitable for over-tiling indoor applications on old tiles, without primer
- Suitable for applications where high performance is required, i.e. pools, industrial areas, facades
- Spot-gluing insulating panels made of polystyrene, polyurethane foam, rock or glass wool.
Characteristics and Advantages
- No vertical slipping
- High flexibility
- Extended open time
- Frost proof
- One-pack
- Can be applied up to 15 mm thick
Colour
Grey, White
Packaging
25 kg bags
Product Data Sheet
Sika Ceram-255 StarFlexSafety Data Sheets
Sika Ceram-255 StarFlexSikaCeram®-290 StarLight
SikaCeram®-290 StarLight is a multi-flow, deformable, high-coverage (up to 80 % extra coverage compared to normal tile adhesive), low dust, one-pack tile adhesive with lightweight fillers. It contains recycled raw materials which reduces carbon footprint.
It can be used in layers up to 15 mm thick and is suitable for tiling grès porcelain and natural stone on facade, heating floors, swimming pools and industrial floorings. EN 12004 class C2 TE S1.
Use
SikaCeram®-290 StarLight is suitable for bonding the following types of tiles:
- All kinds of ceramic tiles, including grès porcelain in large size and in thin slabs
- Marble and other natural stone tiles, provided they are not sensitive to water
SikaCeram®-290 StarLight can be used indoors and outdoors, on floors and walls on the following substrate surfaces:
- Gypsum and cement based substrates
- For overlaying existing sound ceramic tiles or stones, paints indoors
- For overlaying existing sound PVC sheet, linoleum and vinyl tiled floors indoors
SikaCeram®-290 StarLight is suitable for applications demanding high performance, such as:
- Swimming pools
- Heated floors (water and electric systems)
- Industrial and heavy traffic floors
- Facades
- Spot-gluing insulating panels made of polystyrene, polyurethane foam, rock or glass wool
Characteristics and Advantages
- Multi-Flow: From Thin-bed to Flow-bed consistency.
- High coverage (up to 80 % extra compared to normal tile adhesive)
- Low dust emission
- Recycled raw materials
- Deformability
- No vertical slip
- Extended open time
Colour
Grey powder
Packaging
15 kg bag
Product Data Sheet
SikaCeram-290 StarLightSafety Data Sheets
SikaCeram-290 StarLightSikaCeram®-100 Basic
SikaCeram®-100 Basic is one-pack tile adhesive intended to lay absorbent tiles on absorbent substrate in residential use. EN 12004 class C1.
Use
SikaCeram®-100 Basic is suitable for bonding the following types of tiles:
- Absorbent ceramic tiles
SikaCeram®-100 Basic can be used on indoor walls and floors, and outdoor floors including:
For residential use
- On spot-gluing insulating panels made of polystyrene, polyurethane foam, rock or glass wool
SikaCeram®-100 Basic mixed with SikaCeram® T Latex (7-7.25 L /bag) is used for:
Bonding the following types of tiles:
- All kind of ceramic tiles, even grès porcelain in large size and in thin slabs
On the following surfaces:
- Gypsum- or cement- based substrates
- Old ceramic tiles, stones or paint
- PVC, linoleum, old vinyl floors
For applications high performances demanding, such as:
- Swimming pools
- Heating floors, water and electric systems
- Industrial and heavy traffic floors
- Facades
Characteristics and Advantages
- One-pack
- Frost resistant
Colour
Grey, White
Packaging
25 kg bag
SikaCeram® T Latex
Synthetic rubber latex for cementitious grouting compounds
Use
Sika Ceram-100 Basic blended with Sika Ceram T-Latex can be applied to lay grès porcelain, any kind of ceramic tiles and natural stones (provided they are not sensitive to water) in the following applications:
- Old ceramic flooring, outdoors
- Heated floors
- Gres porcelain, outdoors
- For medium and large tiles on facades, or in environments subject to thermal stress
- On gypsum board (using Sika Primer-11 W is not mandatory)
Characteristics and Advantages
- High adhesion performance
- High elasticity
Colour
White liquid
Packaging
1 kg bottle and 5 kg can
SikaCeram® CleanGrout
Cement based grouting for joints from 1 to 8 mm width, CG2 classified according to EN 13888
Use
- Grouting the joints between all types of ceramic tiles
- Application indoors and outdoors
- Grouting marble
- Grouting in swimming pools
- Grouting glass mosaics
- Grouting on heated flooring
- Bonding particleboard, plywood, fibre cement and strip flooring to joists
Characteristics and Advantages
- Water repellent
- High degree of hardness
- UV resistant
- Frost proof
- Inhibits the growth of bacteria, mould and fungi
- Hygienic
- Abrasion resistant
Colour
A range of colours are available
Packaging
5 kg bags
Product Data Sheet
Sika Ceram CleanGroutSafety Data Sheets
Sika Ceram CleanGroutSikaCeram® LatexGrout
Synthetic rubber latex for cementitious grouting compounds
Use
- Ceramic floors subject to intenstive pedestrian traffic
- Ceramic cladding fixed on wood
- Ceramic cladding installed outdoors or in swimming pools
- Floorings subjected to frequent and thorough washing, such as bathrooms, showers in gymnasiums, sports centers, etc
Characteristics and Advantages
- Increases the bond to the tile
- Increases the surface hardness
- Increases the flexibility
- Increases the mechanical strength
- Reduces the absorption
Colour
White liquid
Packaging
1 litre bottle and 5 kg can