Wet Areas (Bathrooms | Kitchens)


SikaScreed®-1 is a pre-mixed product for quick drying shrinkage-free indoor and outdoor screeds.

Sika® Primer-11 W+

Sika® Primer-11 W+ is a synthetic resin primer applied before using tile adhesives and/or self- levelling compounds on indoor floors or walls to primarily reduce substrate absorbency and improve adhesion.

Sikafloor®-01 Primer

Universal dispersion primer for use with cementitious levelling compounds or tile adhesives

Sika® Primer-21 W

Sika® Primer-21 W is a primer based on epoxy resins, fillers and specific additives in water dispersion used as a base coat or adhesive bridge on several types of substrates.


BRANZ Appraised rapid curing cement mortar for flexible waterproofing and concrete protection (meets the requirements of EN 1504-2)

Sikalastic®-220 W

Sikalastic®-220 W is a ready to apply, one part, water based resin, liquid applied membrane for wet rooms. Provides a fully bonded waterproof finish ready for the application of tiles. Thickness > 0,5 mm. Internal use.

Sika® SealTape S

Special tape for waterproof sealing around perimeters and joints in wet tiled areas (system component)

SikaCeram®-205 Large

Powder adhesive for fixing of medium-large sized ceramic tiles, C2TE classified according to EN 12004

SikaCeram®-290 StarLight

SikaCeram®-290 StarLight is a multi-flow, deformable, high-coverage (up to 80 % extra coverage compared to normal tile adhesive), low dust, one-pack tile adhesive with lightweight fillers. It contains recycled raw materials which reduces carbon footprint.

It can be used in layers up to 15 mm thick and is suitable for tiling grès porcelain and natural stone on facade, heating floors, swimming pools and industrial floorings. EN 12004 class C2 TE S1.

SikaCeram® CleanGrout

Cement based grouting for joints from 1 to 8 mm width, CG2 classified according to EN 13888

SikaCeram® EpoxyGrout

Anti-acid epoxy grout with glossy colours and delicate finishing designed for joints from 2-20mm in width.

SikaCeram® Epoxy Remover

SikaCeram® Epoxy Remover is a water-based product used to remove epoxy grouting residuals.