Acid Proof Coatings and Linings
Sikagard®-62
(Only to be installed by a Sika Approved Contractor) Two part, chemical resistant, roll-on epoxy coating
Use
- Abrasion-resistant universal coating material designed for normal to moderately aggressive chemical environments
- For linings to storage tanks and silos, bund areas, wastewater tanks, geothermal cooling tower basins, reservoirs
Characteristics and Advantages
- Solvent-free
- Good chemical and mechanical resistance
- Easy to mix and work
- High-build
- Impervious to liquids
- Approved for use with potable water
Colour
Refer to Product Data Sheet for coloursPackaging
Refer to Product Data sheets for packaging sizeProduct Data Sheet
Sikagard-62 (AU)Sikafloor®-381
(Only to be installed by a Sika Approved Contractor) Self smoothing (1.5-2.5mm) epoxy coating, highly chemically and mechanically resistant
Use
Chemically and mechanically highly resistant coating for concrete and screed surfaces in bund areas for protection against water contaminating liquids (according to the product chemical resistance table)
Characteristics and Advantages
- High chemical resistance
- High mechanical resistance
- Liquid proof
- Abrasion resistant
- Slip resistant surface possible
Colour
Refer to Product Data Sheet for coloursPackaging
Refer to Product Data sheets for packaging sizes
Product Data Sheet
Sikafloor-381SikaCor® VEL
(Only to be installed by a Sika Approved Contractor) Vinyl ester resin based laminate system, high chemical resistance to acids
Use
Especially designed for use in a chemically stressed environment, where high chemical resistance is essential also:
- Tank and bund lining
- Lining retention ponds
Characteristics and Advantages
- High chemical resistance to acids, alkais, leachates, solvents and oxidizing agents
- Applicable on concrete and steel
- Fast curing
- Laminate system has good crack bridging properties
- Available as a conductive or non conductive system