Product Data Sheet Safety Data Sheet Show all documents

SikaCeram® Epoxy Remover

Cleaner for epoxy grouting residuals

SikaCeram® Epoxy Remover is a water-based product used to remove epoxy grouting residuals.

  • Specific for Sika epoxy grouting
  • Efficient also after several days from grouting application
  • Easy to use
Where to buy
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Removal, from ceramic or porcelain stoneware tile, of light or even heavy residues of epoxy grouting such as SikaCeram® Epoxy Remover.
  • Used thinned, it cleans and degrease very dirty floors in porcelain stoneware and ceramic.
 

Advantages

  • Specific for Sika epoxy grouting
  • Efficient also after several days from grouting application
  • Easy to use

Packaging

2 kg or 5 kg plastic bottle

Colour

Pale yellow liquid

Product Details

Product Information

Chemical Base

Water-based product. Containing: EDTA and salts ≤ 5%, soap between 5 % and 15 %. Other components: fragrance.

Shelf Life

24 months from date of production

Storage Conditions

Store at temperature between +5°C and +30°C

Density

~ 1.01 kg/l

pH-Value

~ 11.3

Application

Application steps

APPLICATION

SikaCeram® Epoxy Remover should be used either undiluted or diluted with water, as required.

 
How to remove consistent epoxy grouting residues
Pour on the undiluted product; allow to act for 15-20 minutes, then rub with abrasive felt and rinse off; if necessary, use a metal trowel to remove built up grouting from the tiles, then rub with the abrasive felt.

 
How remove the stains left by epoxy grouting or use as a dewaxer
Dilute the product in water in ratio of 1:5, apply and allow it to act for a few minutes; rub with felt, or use a scrubbing brush or single-disc cleaner; vacuum or wipe up dirt and rinse with plenty of water.

 
To remove stains from porcelain stoneware
Pour the undiluted product on to the stain and all over the tile; allow the product to act for 15-20 min, then rub with abrasive felt and rinse.

Documents